Your Quality OEM Supplier For Life!

Specializing in Rubber, Plastic, and Metal Work.


Permanent Mold Casting

At RPM Engineering Corp. Instead of using the sand as the mold material, a metal is used as a mold. Typically cast iron or Meehanite ( a dense cast iron ) is used as the mold material and the cores are made from metal or sand. Cavity surfaces are coated with a thin layer of heat resistant material such as clay or sodium silicate.

What is Pemanent Mold Casting?

Permanent mold casting is a metal casting process that shares similarities to both sand casting and die casting. As in sand casting, molten metal is poured into a mold which is clamped shut until the material cools and solidifies into the desired part shape. However, sand casting uses an expendable mold which is destroyed after each cycle. Permanent mold casting, like die casting, uses a metal mold (die) that is typically made from steel or cast iron and can be reused for several thousand cycles. Because the molten metal is poured into the die and not forcibly injected, permanent mold casting is often referred to as gravity die casting. Permanent mold casting is typically used for high-volume production of small, simple metal parts with uniform wall thickness. Non-ferrous metals are typically used in this process, such as aluminum alloys, magnesium alloys, and copper alloys. However, irons and steels can also be cast using graphite molds. Common permanent mold parts include gears and gear housings, pipe fittings, and other automotive and aircraft components such as pistons, impellers, and wheels.

Materials for Permanent Mold Casting: Brass, Bronze, Aluminum

Please contact us for your permanent mold casting and sand casting needs.

Telephone: 888-467-0818 | 757-502-5462 Fax: 800-773-8744 | 757-502-5465 Email:
RPM Engineering Corp. | 2533 Aviator Drive - Virginia Beach, VA 23453